K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
9. Install the shift cable to the support.
Notice: Refer to Fastener Notice in Service Precautions.
10. Install the bolt securing the shift cable support to the brace.
^
Tighten the bolts to 10 Nm (89 inch lbs.).
11. Install the carpet and insulation around the driver's area.
12. Install the driver's seat from vehicle.
13. Install the steering column shroud.
14. Raise the vehicle. Refer to Vehicle Lifting.
15. Grasp the front half (cab end) of the transmission cable (1) in the left hand and the rear half (transmission end) of the transmission cable (2) in the
right hand.
