K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
With the transmission supported on the transmission stand, perform the following steps.
1.
Locate the Transmission to Engine Stand Adapter Plate J 44723.
2.
Remove BOTH of the transmission PTO side covers (2).
3.
Locate six M10 x 1.5 bolts (38 mm (1-1/2) long).
4.
With the transmission supported on the transmission jack, attach the J 44723 Adapter Plate to the PTO side cover opening with the six bolts.
5.
With the aid of the hoist, transfer the transmission to the engine stand.
6.
Position the transmission so that the converter housing is pointed upward and secure so the transmission will not rotate in the engine stand.
Caution:
The Allison(R) 1000 Series (M74) torque converter has a dry weight of approximately 29 kg (63 lbs). Use caution when handling to avoid
personal injury.
