K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
Important:
You will need to note the proper orientation of the two springs and the two valves. The replacement springs must be installed exactly like the
removed component or transmission failures and/or shift conditions will occur.
59.
With the ground sleeve facing up and the support assembly turned so the area without visible oil passages is on the top left, a notch should be seen
at the lower left portion of the support assembly. Compress the lube regulator spring to enable removal of the retaining pin (1). The following
items are to be removed.
60.
Insert the J 43773 (2) into the bore you just removed the above components from. Compress the converter relief valve spring enough to remove
the "U" shaped retaining clip (1) and remove the clip. Then remove the following items.
