K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
78.
Install eight of the short bolts into the locations marked with the (1). Tighten the bolts finger tight. Then snug the bolts with a socket. The bolts
will be tightened to final torque later.
79.
Remove the guide pins.
80.
Install two of the short bolts into the locations where the guide pins were located. Tighten the bolts finger tight. Then snug the bolts with a socket.
The bolts will be tightened to final torque later.
81.
Install the guide pins into a couple of the transmission bolt holes.
82.
Place the main housing gasket into position over the guide pins onto the transmission case assembly.
83.
Place the transmission converter housing, pump assembly, and support (1) into position on the transmission assembly.
