K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
46.
Looking into and around the outside of the converter housing, you will find thirty (30) bolt heads. One at a time, loosen all these bolts about one
turn. They were tightened to 54 N.m (40 lb ft).
47.
Remove the twenty outermost converter housing to transmission bolts.
Caution:
The converter housing and front pump assembly has a dry weight of approximately 27 kg (60 lb). Use caution when lifting the converter
housing in order to prevent personal injury.
48.
Lift the converter housing and front pump assembly from the transmission.
49.
Remove and discard the housing to separator plate GASKET (3).
Note:
Use care so damage to the separator plate is not incurred when separating the front support and pump assembly from the converter housing or
when separating the front support from the pump assembly.
50.
Place the converter housing and front pump assembly on a clean work area.
51.
Remove the front pump input seal and discard the seal.
