gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Driveline - Bump/Clunk/Squawking Noises|Page 10159 > < Driveline - Bump/Clunk/Squawking Noises|Page 10153
Page 1
background image

Slip Yoke: All Technical Service Bulletins
Driveline - Bump/Clunk/Squawking Noises

Bulletin No.: 01-04-17-004B

Date: January 05, 2005

TECHNICAL

Subject:
Clunk, Bump or Squawk when Vehicle Comes to Complete Stop or Accelerating from Complete Stop (Replace Rear Drive Shaft Nickel-Plated Slip
Yoke)

Models

Supercede:

This bulletin is being revised to add Cadillac Escalade (Old Style) to the Models section. Please discard Corporate Bulletin Number 01-04-17-004A
(Section 04 - Driveline/Axle).

Condition

Some customers may comment on a clunk, bump or squawk noise when the vehicle comes to a stop or when accelerating from a complete stop.

Cause

A slip/stick condition between the transfer case output shaft and the driveshaft slip yoke may cause this condition.

Diagnostic Tips

There are several resources in the electronic Service Information System which can provide the technician with information on diagnosis and repair of
clunk conditions, and fix the customer's vehicle right the first time without unnecessary parts replacement. Some of the documents available in SI
include:

^

Symptoms - Propeller Shaft

Driveline - Bump/Clunk/Squawking Noises|Page 10159 > < Driveline - Bump/Clunk/Squawking Noises|Page 10153