K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
11.
For the 1500HD, 2500, 3500, and HUMMER H2 models, assemble the bolts and the support plate to the base of the J 36652-98 and secure the
base in a vise.
12.
Inspect the inboard stroke position.
^
Use measurement A for the 1500 models (except 1500HD).
^
Use measurement B for the 1500HD, 2500, 3500, and HUMMER H2 models.
13.
Position the inboard end (tripot end) of the halfshaft assembly into the base of the J-36652-01 for the 1500 models (except 1500HD) or J
36652-98 for the 1500HD, 2500, 3500 and HUMMER H2 models.
14.
Install the top half of the J-36652-01 for the 1500 models (except 1500HD) or J 36652-98 for the 1500HD, 2500, 3500 and HUMMER H2
models.
15.
Align the swage ring (2) and the swage ring clamp.
16.
Insert the bolts.
Tighten
Hand tighten the bolts until the bolts are snug.
Important:
Align the following during this procedure:
