K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
4.
Remove the adjuster nut lock key.
Notice:
Refer to Fastener Notice in Cautions and Notices.
5.
Tighten the wheel bearing adjusting nut using the J 2222-C.
Rotate the hub in the opposite direction to the way the adjuster nut is turning.
Ensure the inner bearing and the seal seats against the spindle shoulder.
Tighten
Tighten the adjusting nut to 70 N.m (52 lb ft).
6.
Turn the adjusting nut counterclockwise until the nut is loose using the J 2222-C.
7.
Turn the adjusting nut clockwise until the nut contacts the bearing cone. Torque on the nut must be zero to finger tight.
