K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
8. Install the nut (2) and washer (3) retaining the wheel drive shaft assembly to the wheel hub and bearing.
^
Tighten the nut to 210 Nm (155 lb ft).
9. Connect the electrical connection for the wheel speed sensor.
10. Install the wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle.
^
Tighten the bolt to 12 Nm (106 inch lbs.).
11. Install the rotor. Refer to Brake Rotor Replacement - Front in Brakes and Traction Control.
12. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation.
13. Lower the vehicle.
