K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
2. Using J 36502, install the rear output shaft seal.
3. Remove J 36502-2A from the output shaft.
4. Fill the space between the seal lips with grease GM P/N 1052497 or equivalent.
5. Install the transfer case.
6. Install the rear propeller shaft.
7. Check the transmission oil level.
8. Lower the vehicle.
Transmission Housing Oil Seal Replacement (Rear Seal 2WD)
Transmission Housing Oil Seal Replacement (Rear Seal 2WD)
^
Tools Required
-
J 23129 Universal Seal Remover.
-
J 6125- 1B Slide hammer.
-
J 36503 Seal Installer.
Removal Procedure
