K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
1. Place the seal in the front case with part numbers facing out.
2. Using the J 44731 install the input shaft seal.
3. Install the clutch actuator.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the clutch actuator bolts or nuts.
^
Tighten the clutch actuator bolts or nuts to 8 Nm (71 inch lbs.)
5. Install the transmission.
6. Inspect the fluid level.
7. Install the rear propeller.
8. Lower the vehicle.