K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
Installation Procedure
1. Install the mount.
2. Loosely install the mount to transmission bolts.
3. Lower the transmission.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the nut holding the rear engine mount to the transmission support.
^
Tighten the nut to 45 Nm (33 ft. lbs.).
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
5. Lower the vehicle.
