K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
14. Remove the transfer case gasket.
Installation Procedure
Important: If the gasket or the seal for the transfer case adapter becomes damaged, replace it. DO NOT use any type of silicone sealer or liquid
gasket maker in place of the seal or gasket.
1. Install the new transfer case adapter seal.
2. Install the transfer case adapter to the transmission.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the transfer case adapter mounting bolts.
^
Tighten the transfer case adapter mounting bolts to 50 Nm (34 ft. lbs.).
