K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
6. Insert a small pry bar in the inner race.
Important: When performing the following service procedure, the outer part of the seal will slightly move out of the transfer case with the inner part
seal.
7. Pry the inner part of the seal from the outer seal body.
8. Remove the inner part of the seal.
9. Insert a flat-tipped screw driver or small pry bar in the space between the outer race of the seal and the transfer case.
10. Pry the outer race out of the transfer case.
