K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
29. If using the short method, cut the tip of the applicator nozzle in order to provide a bead of 6.0 mm (1/4 in).
30. If using the extended method, cut the applicator nozzle in order to provide a bead of 12.7 mm (1/2 in) wide and 12.7 mm (1/2 in) high.
31. Use a cartridge type caulking gun to apply a smooth, continuous bead of urethane adhesive.
32. When using the short method, apply the urethane adhesive to the existing bead of urethane adhesive on the body.
33. When using the extended method, use the edge of the windshield window or the inside edge of the reveal molding as a guide for the nozzle in
order to apply the urethane adhesive (1) to the inner surface of the windshield window (3).
If applying urethane adhesive to the inside edge of the windshield reveal molding (1) use the windshield reveal molding as a guide for the nozzle.
34. With the aid of an assistant, use the suction cups in order to install the windshield window into the opening.
