K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Accessory Delay Module: Service and Repair
Base
Power Accessory Switch Panel Replacement
REMOVAL PROCEDURE
1. Use a small flat blade tool in order to carefully pry the door accessory mounting panel from the door trim panel.
2. Remove the switch mounting panel.
3. Disconnect the power accessory electrical connectors from the switches and the speaker, as necessary.
4. Use a flat blade tool in order to carefully pry the switches from the accessory mounting panel.
5. Remove the switches.
6. Carefully spread the speaker grill retainers, as necessary.
7. Rotate the speaker counterclockwise, as necessary.
8. Remove the speaker from the switch mounting panel.
INSTALLATION PROCEDURE
1. Rotate the speaker clockwise in order to install the speaker to the switch mounting panel, as necessary.
2. Snap the speaker grill in place in the switch mounting panel, as necessary.
3. Snap the switches in place in the switch mounting panel.
4. Connect the power accessory electrical connectors to the switches and the speaker, as necessary.
5. Snap the switch mounting panel in place.
