K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Front Bumper Shock Absorber: Service and Repair
Front Bumper Center Filler Replacement
Removal Procedure
1. Remove the grille.
2. Remove the filler panel to the radiator support screws (7).
3. Remove the filler center panel (8) from the vehicle.
Installation Procedure
1. Install the filler center panel (8) to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the filler panel to radiator support screws (7).
Tighten the screws to 2 N.m (18 lb in).
3. Install the grille to the vehicle.
