K Yukon/Denali 4WD V8-5.7L VIN R (2000)
6. Drill a 13 mm (1/2 in) hole at the pilot locations (Fig. 4-33).
IMPORTANT: Prior to refinishing, refer to the publication GM4901M-D-2000 "GM Approved Refinish Materials" for recommended products.
Do not combine paint systems. Refer to paint manufacturer's recommendations.
7. Clean and prepare all of the bare metal surfaces.
8. Apply approved anti-corrosion primer.
9. Apply full-bodied caulk to the entire hinge mounting surface in order to ensure a proper seal.
10. Align the hinge and the backing plate with the holes in the door (Fig. 4-34).
11. Install the bolts. Tighten the bolts to 25 N.m (20 ft lb).
12. Apply the sealers.
13. Refinish the metal surfaces as necessary.
14. Install and align all of the related panels and the components.
Front Side Door Hinge Replacement - Body Side
