K Yukon/Denali 4WD V8-5.7L VIN R (2000)
1. Align the retainer with the slot in the trim panel.
2. Push to install the retainers to the trim panel.
3. Install the courtesy lamp lens or the reflector.
4. Align the retainers with the holes in the door.
5. Install the trim panel to the door by carefully applying pressure in order to seat the retainers.
6. Install the window regulator handle, as necessary.
7. Install the power accessory switch mounting panel, as necessary.
NOTE: Refer to Fastener Notice in Service Precautions.
8. Install the trim panel armrest screw.
Tighten
Tighten the trim panel armrest screw to 2 N.m (18 lb in).
9. Insert the screw cover.
10. Install the trim panel upper extension.
11. Install the door handle bezel.
Cab / Chassis
Front Side Door Trim Panel Replacement
Tools Required
J 38778 Trim Panel Remover
Removal Procedure
