K Yukon/Denali 4WD V8-5.7L VIN R (2000)
8. On utility vehicles, remove the child security lock from the lock assembly.
Installation Procedure
1. Install the lock assembly to the vehicle.
2. On utility vehicles, install the child security lock to the lock assembly.
3. Install the lock assembly bolts.
4. Connect the power lock connector.
5. Install the outside door handle by completing the appropriate step:
*
On the Crew Cab vehicles, snap the threaded clip in order to install the outside door handle.
*
On the 4-door Yukon/Tahoe vehicles, push in the clip in order to install the outside door handle.
6. Install the water deflector.
7. Install the trim panel.
Sierra / Silverado
Rear Door Lock Replacement
Removal Procedure
1. Remove the door trim panel, as necessary.
2. Remove the access hole cover, as necessary.
