K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Rear Door Limiter: Service and Repair
Rear Door Check Link Replacement
Rear Door Check Link Replacement
Removal Procedure
1. Apply cloth-backed tape to the door and to the body pillar around the hinge area.
2. Remove the pin retainer.
3. Using a soft-faced hammer and locking pliers, remove the hinge pin.
4. Remove the spring.
5. Remove the check assembly.
Installation Procedure
1. Install the check assembly.
2. Install the spring.
3. Using a soft-faced hammer and locking pliers, install the hinge pin.
4. Install the new pin retainer.
5. Remove the cloth-backed tape from the door and from the body pillar.
