K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Rear Door Window Glass Weatherstrip: Service and Repair
Door Window Channel
Window Channel Replacement (Rear Door)
Removal Procedure
1. Remove the window.
2. Remove the window glass weatherstrip.
3. Remove the front glass run channel top bolt.
4. Remove the front glass run channel from the door.
Installation Procedure
1. Install the front glass run channel to the door.
2. Install the front glass run channel top bolt finger tight.
Do not tighten the bolt.
3. Install the window glass weatherstrip.
4. Install the window.
Notice: Refer to Fastener Notice in Service Precautions.
5. Tighten the window front channel top bolt.
Tighten the window front channel top bolt to 2 N.m (18 lb in).
