K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Cargo Cover: Service and Repair
Luggage Shade Replacement
Luggage Shade Replacement
Removal Procedure
The vehicle will have a luggage shade located in the rear compartment, if equipped. The luggage shade adjusts to 3 positions to cover the rear
compartment area of the vehicle.
1. Release the luggage shade assembly from the vehicle.
1. Pull back and up to release the rear of the luggage shade.
2. Pull in and up to release the front of the luggage shade.
2. Remove the luggage shade assembly from the vehicle.
Installation Procedure
1. Install the luggage shade assembly to the vehicle.
1. Insert the front of the luggage shade into the right side first.
2. Push the luggage shade up and insert the left side into the interior side panel.
3. Pull the luggage shade back.
4. Insert into one of the 3 available positions.
2. Check to make sure the luggage shade is locked into one of the 3 available positions.