K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Drink Holders: Removal and Replacement
Cupholder Replacement
Cupholder Replacement
Removal Procedure
1. Remove the ashtray.
2. Slide the cupholder out.
3. Remove the knee bolster.
4. Remove the two rear screws from the cupholder.
5. Remove the cupholder retainer from underneath the instrument panel by twisting the retainer to the left.
6. Remove the cupholder.
Installation Procedure
1. Slide the cupholder onto the metal track in the instrument panel.
2. Install the cupholder retainer from underneath the instrument panel by twisting the retainer to the right.
3. Slide the cupholder into the instrument panel.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the two rear screws to the cupholder
Tighten the screws to 2 N.m (18 lb in), while holding the cupholder face plate against the cluster bezel opening to assure proper
alignment.
5. Install the ashtray.
6. Install the knee bolster.
Front Floor Console Cup Holder Replacement
Front Floor Console Cup Holder Replacement
Removal Procedure
