K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Glove Compartment: Removal and Replacement
Instrument Panel Compartment Replacement
Removal Procedure
1. Roll the instrument panel. Refer to Instrument Panel Assembly Replacement.
2. Remove the four nuts that retain the instrument panel compartment assembly to the carrier.
3. Remove the instrument panel compartment from the instrument panel.
4. Remove the distorted clips from the IP.
Installation Procedure
1. Install the instrument panel compartment into the instrument panel.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the four nuts that retain the instrument panel compartment assembly to the carrier.
Tighten the nuts to 10 N.m (89 lb in).
3. Roll the instrument panel back into place and secure. Refer to Instrument Panel Assembly Replacement.
