K Yukon/Denali 4WD V8-5.7L VIN R (2000)
3. Remove the center pillar molding screws.
4. Remove the center pillar moldings.
Installation Procedure
1. Install the center pillar moldings.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the center pillar moldings screws to the center pillar.
Tighten the center pillar molding screws to 2 N.m (18 lb in).
3. Install the seat belt height adjusters to the center pillars.
4. Install the door sill trim plates.
Garnish Molding Replacement - Upper
Garnish Molding Replacement - Upper
Removal Procedure
1. Remove the upper windshield trim.
2. Remove the roof side door trim.
3. Remove the garnish molding upper trim (1).
Installation Procedure