K Yukon/Denali 4WD V8-5.7L VIN R (2000)
3. Remove the jack and tools from the stowage tray.
4. Remove the jack and tool stowage tray.
Installation Procedure
1. Install the jack and tool stowage tray.
2. Install the jack and tools into the stowage tray.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the jack and tool stowage tray cover and nut.
Tighten the nut to retain the jack and tool stowage tray cover to 5 N.m (44 lb in).
MAP Pocket Trim Panel Replacement