K Yukon/Denali 4WD V8-5.7L VIN R (2000)
2. Remove the headrests (2) from the seat back.
3. Release the bottom edge of the seat back cover.
4. Release the hook and loop strips retaining the seat back cover to the seat back foam pad.
5. To ease removal, place a piece of cardboard between the seat back cover and the foam pad.
6. Working from side to side, carefully lift the seat back cover from the foam pad.
Installation Procedure, Right Side
1. Working from side to side, carefully install the seat back cover over the foam pad.
2. Remove the cardboard from between the seat back cover and the foam pad.
3. Engage the hook and loop strips that retain the seat back cover to the seat back foam pad.
4. Secure the bottom edge of the seat back cover.
5. Install the headrests (2) to the seat back.
6. Install the armrest to the seat back.
Removal Procedure, Left Side
1. Remove the armrest from the seat back.
2. Remove the headrests (1) from the seat back.
3. Release the bottom edge of the seat back cover (2).
4. Release the hook and loop strips retaining the seat back cover to the seat back foam pad.
5. To ease removal, place a piece of cardboard between the seat back cover and the foam pad.
6. Working from side to side, carefully lift the seat back cover from the foam pad.
Installation Procedure, Left Side
1. Working from side to side, carefully install the seat back cover over the foam pad.
