K Yukon/Denali 4WD V8-5.7L VIN R (2000)
5. Remove the seat cushion (7) and disconnect the heater element.
Installation Procedure, Right Side
1. Install the seat cushion (7) and connect the heater element.
2. Install the seat cushion cover (8).
3. Install the headrest stowage guides (2).
4. Close the seat bottom closeout and attach to hook and loop fasteners.
5. Install the rear seat bottom and bolts.
Removal Procedure, Left Side
1. Remove the rear seat bottom and bolts.
2. Open the seat bottom closeout.
3. Remove the headrest stowage guides (2).
4. Remove the seat cushion cover (8).
5. Remove the seat cushion (7) and disconnect the heater element.
Installation Procedure, Left Side
1. Install the seat cushion (7) and connect the heater element.
2. Install the seat cushion cover (8).
3. Install the headrest stowage guides (2).
4. Close the seat bottom closeout and attach to hook and loop fasteners.
5. Install the rear seat bottom and bolts.