K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Power Seat Switch: Service and Repair
Lumbar Switch Replacement (Manual Split Bench)
Lumbar Switch Replacement (Manual Split Bench)
Removal Procedure
1. Remove the seat from the vehicle.
2. Remove the screws that attach the switch to the side of the seat cushion.
Pull the switch out from the opening in the side of the seat cushion.
3. Remove the switch wiring harness in-line connector.
4. Remove the following components from the side of the seat cushion:
*
The switch
*
The wiring harness
Installation Procedure
1. Route the switch wiring harness through the opening in the side of the seat cushion.
2. Install the switch wiring harness to the vehicle wiring harness.
3. Position the switch in the seat cushion opening.
4. Install the screws.
5. Install the seat assembly into the vehicle.
