K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Tailgate Release Handle: Service and Repair
Endgate Linkage Replacement
Endgate Linkage Replacement
Removal Procedure
1. Remove the operating handle.
2. Lower and support the endgate (3).
Lift the cables off the striker bolts (8).
3. Remove the three bolts holding the latch assembly (4) to the endgate.
4. Remove the latch assembly and the rod (5).
Installation Procedure
1. Install the latch assembly and the rod to the endgate.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the three bolts that hold the latch assembly (4) to the endgate.
Tighten the latch to endgate bolts to 30 N.m (22 lb ft).
