K Yukon/Denali 4WD V8-5.7L VIN R (2000)
^
Tighten the four T-25 Torx screws to 5 Nm (39 inch lbs.) in an X-pattern.
4. Connect the negative battery cable.
5. Revise the tire calibration using the Scan Tool.
6. Return to A Diagnostic System Check.
^
Tighten the four T-25 Torx screws to 5 Nm (39 inch lbs.) in an X-pattern.
4. Connect the negative battery cable.
5. Revise the tire calibration using the Scan Tool.
6. Return to A Diagnostic System Check.