K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Brake Pedal Assy: Service and Repair
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the battery negative cable.
2. Disable the SIR. Refer to Disabling the SIR System in Restraint Systems.
3. Remove the electrical connector from the stoplamp switch.
4. Remove the pushrod retainer.
5. Remove the stoplamp switch.
6. Remove the pushrod.
7. Remove the nut.
8. Remove the brake pedal bolt.
9. Remove the bushings and the spacer.