K Yukon/Denali 4WD V8-5.7L VIN R (2000)
8. Remove the shoe guide.
9. Remove the hold down springs.
10. Remove the hold down pins.
11. Disconnect the actuator lever and the lever pivot.
12. Remove the lever return spring.
13. Remove the actuator link.
14. Disconnect the park brake strut and the strut spring.
15. Remove the park brake lever.
16. Remove the adjusting screw assembly.
17. Remove the screw spring.
18. Inspect all parts for discoloration due to heat or stress. Replace as needed.
19. Inspect all parts for signs of wear. Replace as needed.
20. Inspect the wheel cylinder for signs of leakage. Refer to Wheel Cylinder Replacement.
21. Inspect the brake drum for scoring and machining tolerance. Refer to Brake Drum Inspection (Drum Servicing).
Installation Procedure
