K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Using a suitable tool to lightly pry off the end of the cruise control cable.
5. Disconnect the cruise control cable from the throttle linkage.
6. Disconnect the cruise control cable from the cable bracket.
IMPORTANT: Do not allow the cruise control ribbon to retract into the module assembly.
7. Disconnect the cruise control cable from the cruise control module housing.
8. Disconnect the cable bead (2) from the buckle on the end of the ribbon (1).
9. Remove the cruise control cable from the vehicle.
INSTALLATION PROCEDURE
