K Yukon/Denali 4WD V8-5.7L VIN R (2000)
5. Check the orientation of the cruise control ribbon buckle to the cable end fitting.
6. Snap the cruise control cable fitting (3) into the cruise control module (4).
IMPORTANT: Verify that the cable fitting locking tabs are expanded, and that the tabs are locked in the accelerator bracket hole.
7. Install the cruise control cable fitting into the round hole in the accelerator bracket.
8. Connect the cruise control cable connector (2) to the throttle linkage (1).
9. Adjust the cruise control cable. Refer to Cruise Control Cable Adjustment.
10. Close the hood.
11. Perform the Cruise Control System Functional Test. Refer to Cruise Control System Check.
