K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Cruise Control Switch: Description and Operation
The ACCELERATE Function
Use the ACCELERATE function in order to steadily increase the cruise speed. In order for the ACCELERATE function to operate, the following
conditions must apply:
^
The ON/OFF switch must be in the ON position
^
The vehicle speed must be above 40 km/h (25 mph).
Use the ACCELERATE function as follows to increase the vehicle speed:
1. Slide the RESUME/ACCELERATE switch. Hold the switch in position.
2. Accelerate the vehicle to the desired speed.
3. Release the RESUME/ACCELERATE switch. The cruise control is now reset at the higher speed.
The ACCELERATE function will not operate unless the ON/OFF switch is in the ON position
