K Yukon/Denali 4WD V8-5.7L VIN R (2000)
1. Remove the seats.
2. Remove the floor storage compartment.
3. Remove the grilles from the outlet ducts.
4. Remove the front carpet section.
5. Remove the retaining tape.
6. Remove the locating tab from the floor pan.
7. Remove the ducts by lifting the rear section of the ducts and by gently pulling backward.
INSTALLATION PROCEDURE
1. Install the ducts by lifting the rear section of the ducts and by gently pushing forward.
2. Install the locating tab to the floor pan.
3. Install the retaining tape.
4. Install the front carpet section.
5. Install the grilles to the outlet ducts.
6. Install the floor storage compartment.
7. Install the seats.
