gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Engine - Cranks But Does Not Run Diagnostics Revision|Page 5653 > < Knock Sensor (KS) Sensor|Page 5647
Page 1
background image

Fuel Pressure: Technical Service Bulletins
Engine - Cranks But Does Not Run Diagnostics Revision

File In Section: 06 - Engine/Propulsion System 

Bulletin No.: 01-06-04-057

Date: January, 2002

SERVICE MANUAL UPDATE

Subject:
Revised Engine Cranks But Does Not Run Diagnostic Table

Models:
2000 Chevrolet and GMC C/K Pickup Models
2000 Chevrolet and GMC S/T Pickup and Utility Models
2000 Chevrolet and GMC M/L G Van Models
2000 Oldsmobile Bravada

This bulletin is being issued to revise the Engine Cranks But Does Not Run diagnostic table in the Engine Controls - 4.3L and Engine Controls - 5.0L,
5.7L sub-sections of the Service Manual. Please replace the current information in the Service Manual with the following information.

The following information has been updated within SI2000. If you are using a paper version of this Service Manual, please make a reference to this
bulletin on the affected page.

The fuel pressure specification listed in the Values column for Step 7 currently shows 379-413 kPa (55-60 psi). The specification should read 414-455
kPa (60-66 psi).

Disclaimer

Engine - Cranks But Does Not Run Diagnostics Revision|Page 5653 > < Knock Sensor (KS) Sensor|Page 5647