K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Seat Heater Switch: Service and Repair
Rear Seat Heater Switch Replacement
Rear Seat Heater Switch Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Remove the battery negative cable.
2. Remove the console storage bin.
4. Remove the switch (3) through the center of the console.
Installation Procedure
1. Install the switch (3) through the center of the console.
2. Install the switch connector.
3. Install the console storage bin.
4. Install the battery negative cable.
