K Yukon/Denali 4WD V8-5.7L VIN R (2000)
1. Install the sensor into the timing cover. Lube the O-ring with clean engine oil before installing.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the sensor hold down bolt.
Tighten
Tighten the hold down bolt to 8 N.m (71 lb in.).
3. Install the CKP sensor harness connector.
4. Lower the vehicle.
5. Connect the negative battery cable.
6. Perform the CKP System Variation Learn Procedure. Refer to CKP System Variation Learn Procedure. See: Testing and Inspection/Programming
and Relearning