K Yukon/Denali 4WD V8-5.7L VIN R (2000)
7. Install the J25025-5 into the valve body.
8. Install the case gasket (3) and the valve body gasket (1) to the spacer plate (2). The case gasket is identified by a C. The valve body gasket is
identified by a V.
9. Use the J36850 in order to retain the gaskets (3) to the spacer plate (2).
10. Install the spacer plate and the gaskets to the transmission case.
Notice: Refer to Fastener Notice in Service Precautions.
11. Install the oil pass cover and the oil pass cover bolts.
Tighten the bolts to 11 Nm (97 inch lbs.).
12. Install the 1-2 accumulator piston oil ring seal (1) onto the 1-2 accumulator piston (2).
