K Yukon/Denali 4WD V8-5.7L VIN R (2000)
3. Remove the cover and pin.
4. Remove the piston, ring, and springs. The piston and ring may remain inside the cover and pin.
5. Remove the control valve, if replacing the 3-4 accumulator. Refer to Valve Body.
6. Remove the spring, piston, ring, and pin.
7. Inspect the accumulators.
Installation Procedure
1. Install the spring, piston, ring, and pin.
2. Install the control valve, if removed. Refer to Valve Body.
