K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Shifter Transfer Case: Service and Repair
BW 4401 (Two Speed Manual)
Removal Procedure
1. Remove the shift knobs from the transfer case shift lever.
2. Remove the four screws securing the transfer case shift control bezel to the floor panel bracket and the shift bracket.
3. Remove the wiring harness from the transfer case shift control bezel.
Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the shift lever end from the transfer case linkage rod.
5. Remove the four bolts securing the transfer case shift control to the floor panel bracket.