K Yukon/Denali 4WD V8-5.7L VIN R (2000)
1. Slide the inner mounting panel forward in order to release the regulator roller from the window sash.
Install the inner mounting panel to the window sash.
2. Connect the wiring harness.
3. Install the lock rods to the following components:
*
The lock handle
*
The lock lever
*
The lock rod guides
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the inner panel bolts.
Tighten
Tighten the bolts to 4 N.m (35 lb in).
5. Install the speaker, as necessary.
6. Install the trim panel.
7. Install the water deflector.
