K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
1. Raise the window completely.
2. Remove the front door trim panel.
3. Remove the water deflector.
4. Remove the outside door handle (3).
5. Remove the clip that retains the lock cylinder lever to the lock cylinder (1).
6. Press the lock cylinder retainer. Remove the lock cylinder (1) from the outside door handle (3).
Installation Procedure
1. Press the lock cylinder (1) in the outside door handle (3) in order to engage the lock cylinder retainer.
2. Install the clip in order to retain the lock cylinder lever to the lock cylinder (1).
3. Install the outside door handle (3).
4. Install the front door water deflector.
5. Install the front door trim panel.
Lock Replacement
Removal Procedure
1. Remove the trim panel.
2. Remove the water deflector.
3. Remove the inner mounting panel assembly.
4. Remove the inside door handle and lock control rods.
5. Remove the lock assembly bolts.
6. Remove the outside door handle and lock control rods.
7. Replace the plastic retainers following disassembly.
Installation Procedure
1. Pull out the outside handle from the door opening. Slide the latch outside door connector onto the outside handle rod.
2. Twist the latch into the door assembly.
3. Retain the latch with the 3 screws.
4. Connect the inside handle rod to the latch. The inside handle rod is the top rod.
