K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
1. Install the hub/rotor to the hub and bearing assembly.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the rotor and hub assembly to the axle.
^
Tighten the bolts to 180 Nm (133 ft. lbs.).
^
Tighten the nut to 225 Nm (165 ft. lbs.).
3. Install the brake caliper.
4. Install the tire and wheel assembly.
5. Lower the vehicle.
6. Depress the brake pedal.
Brake Rotor Replacement (K Models Below 8600 GVW)
REMOVAL PROCEDURE
1. Raise the vehicle. Support the vehicle with suitable safety stands.
