K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
2. Install the bolts and the washers.
^
Tighten the bolts to 37 Nm (27 ft. lbs.).
3. Install the drum and the yoke assembly.
4. Install the washer and the nut if equipped with manual transmission.
5. Install the washer and bolt if equipped with an automatic transmission.
^
Tighten the nut to 475 Nm (350 ft. lbs.).
^
Tighten the bolt to 122 Nm (90 ft. lbs.).
6. Install the propeller shaft.
7. Lower the vehicle.