K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
REMOVAL PROCEDURE
^
Tools Required
-
J 23523-F Crankshaft Balancer Remover
1. Remove the upper fan shroud from the radiator. Refer to Fan Shroud Replacement (Upper) in Cooling System.
2. Remove drive belt from the drive pulleys. Refer to Drive Belt Replacement.
3. Raise the vehicle and support with safety stands.
4. Remove the lower fan shroud from the radiator. Refer to Fan Shroud Replacement (Lower) in Cooling System.
5. Remove the crankshaft pulley from the crankshaft balancer.
6. Remove the crankshaft balancer bolt and washer from the crankshaft.
7. Use the J 23523-F to remove the crankshaft balancer from the crankshaft.
8. Remove the from the crankshaft balancer from the crankshaft.
INSTALLATION PROCEDURE
^
Tools Required
-
J 23523-F Crankshaft Balancer Remover
