K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
Cargo Lamp Switch: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the instrument cluster bezel.
3. Disconnect the electrical connectors.
4. Squeeze the tangs together at the side of the switch in order to remove the switch from the bezel.
INSTALLATION PROCEDURE
1. Squeeze together the tangs at the sides of the switch.
2. Press the switch into the front of the bezel.
3. Connect the electrical connectors.
4. Install the bezel to the instrument panel.
5. Connect the negative battery cable.
